| |
Epilamization
|
| |
Notice:
|
New |
|
| |
| The product series Antispread F 2 (up to now) and Wet Stop (up to now) have been replaced by the products Antispread E2 (new) and Wet Stop E (new). Detailed information on the new products please see on page "New products for epilamization". |
| |
Products for epilamization |
We manufacture 2 different products for epilamization:
Antispread E is a high-performance product with high purity for difficult problem solutions.
Wet Stop E has been designed for low-cost applications in mass production.
Both products are available in different concentrations.
Example: Antispread E 2/50 has a 4x higher concentration than Antispread E 2/200.
 |
|
 |
Sizes:
Bottles: 45 g, 90 g, 225 g, 1350 g
Container: 4500 g
|
|
Set for experimenting with Antispread or Wet-Stop |
Products based on partially fluorinated solvents:
Antispread E 2/.. and Wet Stop E:
Both products contain a partially fluorinated solvent as a carrier fluid (FE60), which is non-toxic, not inflammable and compatible with plastics. Its boiling point ranges between 30 - 60°C.
It does not affect lacquers and glues.
Ffollowing concentrations are offered:
- Antispread E 2/30 FE 60 - TE1403
 technical data sheet safety data sheet
- Antispread E 2/50 FE 60 - TE1405
technical data sheet safety data sheet
- Antispread E 2/100 FE 60 - TE1410
technical data sheet safety data sheet
- Antispread E 2/200 FE 60 - TE1420
technical data sheet safety data sheet
- Wet-Stop 30 E - TE1303
technical data sheet safety data sheet
- Wet-Stop 50 E - TE1305
technical data sheet safety data sheet
- Wet-Stop 200 E - TE1320
technical data sheet safety data sheet
E001en
|
